Antique Sound Labs
Frequency Response: 20 Hz - 18.000 Hz.
Nominal Voltage gain: 42 dB
Output: 1.0 Volt.
Input impedance: 47k Ohm.
S/N ratio: 74dB (2mV).
Distortion at 1.0 Volt:0.2%
Output impedance 5k Ohm.
Tubes used: 2 / 12AX7, 1 / 12AU7
Polarity: Non inverting.
Dimentions: 8" wide, 6" deep, 4" high, each chassis.
Weight: 6lbs.
Nominal Voltage gain: 42 dB
Output: 1.0 Volt.
Input impedance: 47k Ohm.
S/N ratio: 74dB (2mV).
Distortion at 1.0 Volt:0.2%
Output impedance 5k Ohm.
Tubes used: 2 / 12AX7, 1 / 12AU7
Polarity: Non inverting.
Dimentions: 8" wide, 6" deep, 4" high, each chassis.
Weight: 6lbs.
Phono Lux DT
High End does not mean high cost. This all tube design has the sound quality of units costing several times as much. How many units at this price have a separate power supply?
If quality sound from your vinyl is what you want, check it out.
If quality sound from your vinyl is what you want, check it out.
Phono Lux DTS
$550.00 (CND)
This is our upgraded version of the ASL Phono Lux.
The appearance is the same, but some critical changes have been made.
The coupling caps have been upgraded.
The power supply has been beefed up.
In addition to the components some circuit changes have been made. The results are slightly better specifications, and a jump in performance well exceeding the extra cost.
The appearance is the same, but some critical changes have been made.
The coupling caps have been upgraded.
The power supply has been beefed up.
In addition to the components some circuit changes have been made. The results are slightly better specifications, and a jump in performance well exceeding the extra cost.
Frequency Response: 20 Hz - 20,000Hz. +/- 0.2db
Nominal Voltage gain: 45 dB
Output: 1.0 Volt.
Input impedance: 47k Ohm.
S/N ratio: 76dB (2mV).
Distortion at 1.0 Volt:0.2%
Output impedance 1.7k Ohm.
Tubes used: 2 / 12AX7, 1 / 12AT7
Polarity: Non inverting.
Dimentions: 8" wide, 6" deep, 4" high, each chassis.
Weight: 6lbs.
Nominal Voltage gain: 45 dB
Output: 1.0 Volt.
Input impedance: 47k Ohm.
S/N ratio: 76dB (2mV).
Distortion at 1.0 Volt:0.2%
Output impedance 1.7k Ohm.
Tubes used: 2 / 12AX7, 1 / 12AT7
Polarity: Non inverting.
Dimentions: 8" wide, 6" deep, 4" high, each chassis.
Weight: 6lbs.
$785.00 (CDN)